The frame is cracked completely through on the inboard side following around to the outboard side (visible from driver side wheel well) and is spidering out from the gear box mounting bolt. I am about to get it welded up, but I was thinking if there is something I should change out prior to welding it up so that it doesn't snap on the other side of the weld. Thanks
It is a common problem. See this post for a solution
https://www.youtube.com/watch?v=j-5OZQs2Rho
SOURCE: RE DOORS FAILING AT HINGE
Look at the hinges. If they are bolted and the only problem is they are loose. Try to tighten tem. A tig weld in place will burn odff any paint and if welded poorly you will have alignment problems. The welder will be welding heavy metal to sheet metal The bolts that hold the door on pass through a heavy steel threaded plat behind the sheet metal. Good Luck, Ned
SOURCE: mystery box on my jeep. what is it????
I would say that is the air bag sensor.If your car has airbags you may need to get a new one.Hope this helps
SOURCE: weld on drivers side top door hinge broke door
It will have to be welded back on. Some grinding, welding, sanding, and paint work will be involved so unless you're pretty handy with bodywork it's a job best left to a reputable body shop.
SOURCE: the driver's seat in my 1989 wagoneer is barely
No this cant be done, there two diffrent seats, i think the best thing is to try and weld it, remove the seat and see if its the track that broke or the floor itself, i just repair one with power seats and the track had a couple of frozen arms and thats what caused seat track to break. i remove the seat and remove track from seat freed frozen linkage arms and welded track all worked out good, hope this helps.
SOURCE: should I change or weld my cracked exhaust
I would change it, it is very difficult to weld a manifold, i know from experience. i made more of a mess than it was worth. i would take care of it soon if the fumes are coming in, carbon dioxide is very dangerous.
I hope this helps. please help me by leaving feedbck, thank you.
241 views
Usually answered in minutes!
×