Need a firing order diagram for a 1995 gmc pickup 1500 350 engine. while replacing spark plugs a wire got unplugged and dont know where it goes because an old wire of the one i had already replaced

For spark plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs?http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

hi laurie.....

firing order is 1-8-4-3-6-5-7-2. #1 usualy points to the #1 cylinder thats front driver side of engine On the cap. Remove the number 1 spark plug and have someone crank a little unitl you hear/feel air. The possition of the rotor is where your number 1 is, go Clockwise to place the wires in the correct order.

Here is the diagram:

Here is the firing order diagrams for the 4.3 liter V-6 engine and the 2.2 liter 4 cylinder engine, and let me know if you need any help to understand these diagrams, or if you require any further assistance.

4.3 Liter V-6 Engine.



2.2 Liter 4 cylinder engine.

One of these firing order diagrams should help to assist you, (depending on either a V-8, or V-6 engine) and let me know if you require any further assistance.

V-8 Firing Order Diagram.



V-6 Firing Order Diagram.

Here ya go:

Several engines here:
* 1.8L (B18B1 and B18C1) Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise



* 2.2L (F22B1) and 2.3L (F23A1) Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise



* 2.5L (G25A4) Engine Firing order: 1-2-4-5-3 Distributorless ignition system



* 3.0L (C30A1) Engine Firing order: 1-4-2-5-3-6 Distributorless ignition system (one coil per cylinder)



* 3.0L (J30A1) Engine Firing order: 1-4-2-5-3-6 Distributor rotation: Counterclockwise



* 3.2L and 3.5L Engines Firing order: 1-2-3-4-5-6 Distributorless Ignition System




Hope helped with this (remember rated this help) Good luck.

im pretty sure it's 18436572.left side 1357,and right side 2468.it's been a while but i'm pretty sure that's correct.

You need to drain some coolant. Loosen and disconnect water lines by the firewall- the ones in the way of your wire change. u need to get a diagram of the firing order of the engine so that those wires are correctly connected to the coil packs.

If you pulled all the wires at once, you will need to go to a parts store and see if they can show you a diagram on how to reset the wires. Do not unhook the wires from the spark plugs at this point.

1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System