How to replace fan belt on 1991 ford explorer
SOURCE: 1991 FORD EXPLORER, FUEL PUMP WAS NOT WORKING. I
there is a short in that wire somewhere and u will have to trace it and look for cracks or frays
SOURCE: 2004 ford explorer how do you release the tension
You put a ratchet or breaker bar into the square hole in the front of tensioner then push to the side to release pressure, do the same to get new belt on.
SOURCE: I need to replace the serpentine belt on my ford
You didn't specify what size engine you had so I've attached 3 diagrams.
1st is for 4.9L
2nd is 5.0 & 5.8L
3rd is 5.0 & 5.8L late model
If you require the 7.3 or 7.5 please post back.
Greg
SOURCE: replacement diagram for 2003 zx2 ford escort fan
Should be on the hood or radiator core support. If not go to junk yard and copy off another escort.
SOURCE: 1991 ford explorer 4wd wont work
No, mostlikely its the "transfer case actuator motor" failing to engage the 4WD mode. its located on the outside of the transfer case @ the back of the unit and mount by 2 or 3 screws usually. You may need to replace it, but if you up to it, call a few trans. shops to see if they can test it if you were to remove it and bring the motor to them for testing. Its an electric motor that in most cases auto parts stores WONT take back for return if that doesnt solve the problem, thats why i recommend talking to a trans shop about having yours tested 1st.
199 views
Usually answered in minutes!
×