Clutch won't disengage on Geo Metro 5-spd manual.
Can start car in neutral but then cannot get car into any gear - grinds gears when tried.
Can also start car if in gear but starter makes car move when engaged even if clutch is depressed. In other words, if the car is in reverse and I crank the starter to start it, the car will start to back-up even if the clutch is depressed. Had to use the starter to back the car out of my parking spot at work, then turn off, shift into 2nd and used the starter to start it again & drove home in 2nd gear.
Cannot shift once car is started - grinds gears when tried.
Thought the starter pinion might be stuck but just replaced that and did not fix problem.
Any suggestions?
Have a 1996 Geo Metro 5 speed. Stopped at stop sign and could not get it to shift out of gear, Have to start it in gear
Hi,
In all likelihood two (2) possibilities:
Should it be the cable, this might be of help. It is turns out to be the fork, you might need the services of a qualified professional or a dealership.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.
879 views
Usually answered in minutes!
×