The lifters and push rods was clogged and gummed up and i dropped the cratle out of the van and put everything new in the motor and never took the transmission off the motor and when i put the motor back in the van it runs perfect. when i put the van in drive to go it is stuck in drive from the get go. it does not start out in 1st ans shift like it is suppossed to. what is the problem?
SOURCE: Pontiac 2006 van montana v6
This is a Door Adjar Warning Light and Buzzer. You may need to get the Door Switch Replaced. It is on the Door and the Door Frame. There are Contact that Need to be Touching to tell the Computer that the Door is Closed Securely. Please Rate My Response! Thanks!
SOURCE: why won't my 2000 pontiac montana transmission
the transmission is gone, check all fuse and relay for the transmission. last effort, hope it fix your problem
SOURCE: 2000 pontiac montana wont go into 4th gear
I would be interested in knowing if the thermostat is sticking open. Most Overdrives are prevented from engaging until the coolant temperature is over 177 degress F. Check you temp gauge...does it read Low? If so, change the t'stat, and see if that fixes your problem, or, if that does not help, get a complete transmission FLUSH, BEFORE you go out and get a rebuild. You just might save a ton of money.
SOURCE: 06 pontiac g6 won't shift out of first gear (automatic trans)._
you might want to take that to a transmission shop and it sounds like the tranny is going out
SOURCE: 2000 pontiac sunfire 2.4L twin cam. When put in
Check your motor mounts, it sound like your motor is rocking back and forth. You can confirm this by watching the engine while someone shifts it in and out of gear for you.
233 views
Usually answered in minutes!
×