SOURCE: firing order for 97 chevy blazer
Firing order is 1-6-5-4-3-2. Distributor cap should be numbered. Number one cylinder is front on driver's side (3 and 5 follow on same side). Number 2 is front on passenger's side (followed by 4 and 6).
SOURCE: I need a diagram for a 1997 Chevy Cavalier 4 cyllander
Hello kahumada1: My name is Roger and I will be glad to help you. The fire order is 1-3-4-2. The coils should be marked. Hear is a picture that should help. Please rate the quality of your answer as this is how we know your answer was correct. Thank You for using FixYa.Roger
SOURCE: coil pack diagram?
cylinder 1 is on passenger side, coils should be numbered, cylinder 4 is on drivers side
SOURCE: 97 Chevy Cavalier misfiring
Sounds like it's you spark plug leads. Depending which engine you have in there, if you have the 2.4L then it is a module.
Testimonial: "Thanks SOOOOOO Much"
SOURCE: What is the firing order for spark plug wires 1996 Chevy Cavalier
Ok Gary I sent you two figures of a 2.2L and 2.4L engine I hope to serve you. Thanks
GM Cavalier/Sunfire 1995-2000 Repair Guide
Print
See Figures 1 and 2
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.
Fig. Fig. 1: 2.2L (VIN 4) Engine Firing Order: 1-3-4-2 Distributorless Ignition System
352 views
Usually answered in minutes!
×