SOURCE: 99 Honda civic 1.6 engine
Tighten the cylinder head bolts to their final torque
specification in two steps. Use a crisscross sequence starting with the
bolts at the middle of the head and working toward the outer bolts.
Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)
Hope helps.
SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence
7.3 ft.lbs Go from middle, to back right, to back left, to front right, to front left. if your standing in fron of your header. 11 or over usually shears the bolt.(if you have stock bolts)
Make sure you dap some rtv on the sharper 4 corners of the gasket where the cam seals are.
James Mac
SOURCE: spark plug torque for honda civic si?
Spark Plug Type NGK: PFR6F-11 DENSO: PKJ20CR-M11 Gap 1.0 - 1.1 mm (0.039 - 0.043 in) 1.3 mm (0.051 in) Torque 18 Nm (13 lb ft)
SOURCE: head bolt torque specs for 200 honda accord 3.0
its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs
SOURCE: hi what is the head torque on a 2002 honda civic
Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then
1,191 views
Usually answered in minutes!
×