On a 96, you can just bypass it. This lik should help you
http://vatspasslockpasskeysecurityhelp.yolasite.com/
SOURCE: 1999 Chev Cavalier power steering oil - 4 cylinder
Most older gm cars you can use dexron 2 transmission fluid or find in your local parts store a good brand of universal fluid.
SOURCE: Short in steering column wiring
torque bit 20 to remove the air bag bolt in the back cover stering puller stering puller to push plate phillip screw driver that about it pierre
SOURCE: 1996 Cavalier ignition switch will not start car.
you apparently have the link either disconnected or bound up at the key end, it may even be disconnect or out of place. If you loosened our outherwise move the lower end switch tou may be able to realighn what is out of whack Good Luck-Ned
SOURCE: Spark plug removal for 1996 Chevy S-10 Pick-up
It take's about 10 min to remove and replace that plug, You need a spark plug socket with a built in swivel and extension. All the plugs should be removed from going through the wheel well by just moving the slash guard out of the way. With the number #3 plug, (drivers side center) Your going to have to use the swivel socket to break loose the spark plug then remove by hand, there is not enough room for the socket and plug to be removed so it needs to be removed by hand and installed by hand too. Once the new plug is installed you can torque it by working the socket back on and then the extension. Good luck and hope this helps, all the other plug can be replaced through the wheel wel; without removing any other thing un less your a larger person and would like to remove the wheel for more room or just by jacking the S10 up but the front frame. Keep me posted and careful not to break a plug.
208 views
Usually answered in minutes!
×