SOURCE: How to install the front license plate on the 2008
There should be guide holes in the bumper for you to mount the plate. It's recommended to mount a backing piece and then mount the place onto the backing for sturdiness. If there are no holes, you can just screw two holes into the bumper
SOURCE: how do you remove rear drivers side door panel on 2002 jeep
Several steps in here; review the KJ-2002-Liberty-Service-Manual-PDF-Secc-23-Body (page 128 and next).
I hope help you with this. Remember rated this help, good luck.
Testimonial: "THat information really helped thanks alot!!!"
SOURCE: remove 2007 jeep compass bumper cover
Hello, I can assist you. Begin by rounding up the necessary tools:
7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291
SOURCE: location of cabin air filter
It can have a cabin air filter, but most vehicles ship without it.
Either way, you can access the cabin air filter housing by opening the glove box all the way (squeeze the sides so it clears the stops).
The filters are around $15 at the dealer.
Whether or not there's a cabin filter installed, make sure you're also
following Chrysler's recommendations in the owner's manual—running the
air on recirculate all the time will encourage mold and bacteria to
grow.
Good luck
1,662 views
Usually answered in minutes!
×