Hi there i have a chicken bone 3 inches ha ha long stcuk in my engine
niot inside the oil compartment but behind the main casing (engine)
inside and below the manifolds gap that is left after the manifolds
come out of the engine and meet.
I have seen it once before but
feel it is not there .i wish it to not to be there from the beginning
but it has happened now. what is the best way to make sure it isn't
there. strip donw the whole engine /(or) just inspect it with a mirror.
as they say you can see/view /inspect the whloe of the engine just by
inspection or does it need stripping apart to 1000% guarantee that the
bone isn't there. .ps ive used a bright led torch and inspected it,
taken it to a few garages and shoved an aerail down the length of the
back of the engine where the cylinderical type of design is (ithink it
is the crankshaft ,just below the manifolds) are not fully visible and
still saw//felt/touched nothing. but something is telling mwe it is
still probable there .How do you to look at that part of the engine
where all the connectors are as that part opf the engine is hidden and
cannot be seen by torch light. ive thought about using a camera to take
a phtograph and used a mirror but still am not fully convinced.
Just leave it there. It's not gonna do harm by just sitting there and it's definitely not worth taking anything apart to remove. In the future if your gonna eat your lunch while you work on your car, try having boneless chicken instead, it's alot safer.
204 views
Usually answered in minutes!
×