I have replaced my ball joints twice and they are bad again any ideas what might be causing this? all in a 6 month period
Always use original parts instead of aftermarket products.Original parts cost bit extra,but they are exact fit and last longer.Click this link below to troubleshoot the issue :----Upper Ball Joints
inspection and replacement?
http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html
How to Test Upper and Lower Ball Joint?
http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html
How to inspect Upper and Lower Ball joint?
http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html
How to Service Ball Joints on Car?
http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html
How to Replace Ball joints?
http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html
Lower Ball Joints replacing
on car?
http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
---------This will help.Thanks.
SOURCE: upper ball joint broke off of socket on 97 chevy pickup
if its original its not that bad just have to cut the rivets of the old ball joint body and remove it from the control arm,and just remove the 7/8" nut from the stem still in the spindle and beat it out with a hammer,hope this helped
696 views
Usually answered in minutes!
×