Torque settings vw polo 1.4 16v - Polo Volkswagen Cars & Trucks

SOURCE: TORQUE SETTINGS FOR 1.4 16V

Cylinder head instructions

Tightening sequence

Cylinder head torque setting for 2004 VW 1.4L 16V fitted in Seat Leon
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

SOURCE: MISFIRING ON CYLINDER 1 VW POLO 1.4 3CYLINDER

I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.

SOURCE: vw polo 1.4 16v 2001

My polo 1.4i 2003 model
when i start the engines it does but starts to work only three cylinder i suppose.
What can i do?
Will be the plugs problems?
or the ignition coil?
Please tell what I have to do now.

SOURCE: What is the Torque setting for Sump Plug VW T25

25Nm

SOURCE: vw polo 1 litre has idling problems it keeps revin...

Either you have a vacuum leak or there may be a fuel pressure problem wih the fuel pressure regulator or pump. Mahe sure the vacuum line to the pressure regulator is working .