My 1996 audi a4 2.8 V-6 serpentine belt started coming off of the pulleys and shredding. My car shut off and i cranked it back up and parked it. I had it towed home and then i tried cranking it without the serpentine belt and it cranked. I put a new serpentine belt on and started it up and then it shut off after 10 seconds. Now it tries to turn over but cant get any fire. Need help please...?
SOURCE: audi a4 1.9tdi 110bhp 1996
did u replace the belt with the same belt which would rightly fit in to ur vehicle or did u put somer other belt... chk out the belt properly
SOURCE: Removing rear bumper on Audi A4 1997 to fit tow bar
Did you get the solution to this, I have the same problem
SOURCE: 1996 Audi A4 2.8L will not shift into reverse or park
You need a new inhibitor switch on the gear selector.
SOURCE: audi serpentine belt problem
are you sure you put it on the right way go to autozone.com and get a belt diagram. did you put the belt on upsidedown?
SOURCE: Audi A4 need to replace rear brake light on audi a4
Inside the boot is a plastic cap embeded in the boot liner. Remove the cap to reveal a screw. Undo the screw and the whole rear light cluster will come away in a sideways and not rearward direction to reveal all of the bulbs. Hope this helps.
69 views
Usually answered in minutes!
×