At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I tried to help a while ago,but it said something I typed wasn't English or some other such nonsense.The port is near the injectors on the fuel rail. But check the fuel pump inertia switch if it might need reset.It is in the trunk or in the front passenger kick board. don-ohio
The fuel pump is located on top and inside the fuel tank. You must remove the fuel tank in order to replace the fuel filter. Disconnect the battery before dropping the fuel tank.
ok your cut off switch is under the glove box in the passenger footwell in the UK version, and mine did not have any further relay until the wiring hit the fuel pump itself, i had been told it was behind a panel in the back under the rear passenger windows, but having removed the entire inner trim of the rear of the car could find no relay at all. my problem was not relay in the end but a dead fuel pumpconfirmed by checking that i9 was getting voltage delivered to the pins of the pump plug when ket switch in position 2 as that is when the pump primes the engine
go here for villager help
http://autos.groups.yahoo.com/group/villagerquest/
SECTION 303-14: Electronic Engine Controls 1999 Villager Workshop Manual
REMOVAL AND INSTALLATION
-------------------------------------------------
It's in the fuel tank. WHy do you think you need to replace it? They seldom go bad.
Fuel Temperature Sensor
Removal
Remove the fuel pump; refer to Section 310-01 .
Remove the fuel temperature sensor.
Disconnect the electrical connector.
Disconnect and remove the fuel temperature sensor from the clip.
×