Engine light is on, the truck keeps downshifting! 2 codes come up (P0340 And P0341)... PLEAS HELP!
Hi..
the Code P0340, Camshaft Position sensor problem or Loss signal.
The Code P0341, Camshaft Position sensor Intermitent Signal.
The First step you should do is : Locate the Camsahaft sensor,
Is located On Right Front of the Engine..
It use a 3 wires Connector.
1-- Pink/Yellow
2-- Brown/Orange
3-- Dark blue/Gray.
After you found it. Inspect the Connector. If is The connector in good condition.
Replace the Camshaft Position sensor...
Ok... I hope this help on your problem..
Thank you for use Fixya...
1,414 views
Usually answered in minutes!
I have this same problem! My truck intermittently lugs, smokes and sometimes just dies and is hard to start. I got those same codes. Any other help?
I had a P0341 code on my ram 2006 3500 diesel so I ghanged the cam position sensor and still have a P0341 code
check light comes on truck duggs down then light goes
off truck runs great.
×