SOURCE: mazda 3 vibration prblem
I have been searching for a possible culprit on this and found the the WHEEL BEARING (inside the wheel hub assembly if I'm not mistaken) could be at fault. At low speeds you will feel/hear a sounds that seems to me coming from your tires (as if you had a flat, but you really don't) and it can cause vibration at higher speeds.
SOURCE: 2000 Mazda 626
i had a similar problem with my 626,what sorted it for me was to clean the crankcase breather tube on top of the rocker cover.The little valve inside this seems to stick but spraying some air intake cleaner (comes in an aerosol can) frees it out and allows the engine to breath better and so tick over evenly.
SOURCE: Check Engine light code 1506
Dear Sir,
P1506 error refers to Idle Air Control System Overspeed Detected.
So solution is check your Air control system wires,and check air control speed once again.
If this not solves your problem back with the result,leave a feedback we happy to help you.
Have a nice day
Good luck
Testimonial: "Well, we have checked all the wires and hoses. All appear to be in good shape. Car runs very well. Should replace plug wires, plugs, gas cap, and BAC?"
SOURCE: Check Engine light code 1506 for 2000 Mazda 626
Here is some problem in your car wiring, some of the jack is lose or unplug near relay box,
76 views
Usually answered in minutes!
×