-
Oldsmobile Master
3,018 Answers
- Posted on Sep 22, 2011
Re: I am changing the serpentine belt on my 1998 olds...
- Fits stick a brick behind each rear wheel and put on the parking break.
- It's not a big job but you will need to support the engine. Just take a nice piece of wood and gently ease up a floor jack with the wood on it under the oil pan. Just until it touches the oil pan and is nicely secure. Your not gonna attempt to jack up the car just add a little needed support. Make sure the wood expands out each side of the oil pan to avoid any dents on the oil pan.
- Now take and remove the two mount bolts on that mount right by the serpentine mount (top side of engine). You can remove all four if this makes the job easier for you but you only need to provide enough space for that belt to slide through.
- The diagram below should be your route for install.
- if you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
Regards,
Tony
×