Cars & Trucks Logo
Anonymous Posted on Sep 21, 2011

How to remove window crank - 1988 Oldsmobile Delta 88

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

  • Master 3,911 Answers
  • Posted on Sep 21, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

Joined: Feb 14, 2009
Answers
3911
Questions
3
Helped
984640
Points
10712

Go on youtube.com and do a search. the two basic styles are:

1) remove the cosmetic cover on the center, back the screw out and pull the handle off

2) take an old well worn dish towel or hand towel and slide it under the crank handle and drag the towel back and forth under the crank handle until it catches an end of the C - clip and it pops off. pull off the handle. do not do this on gravel or in your yard as you will never find the C clip.
You can go to shops that sell auto paint and buy a special tool which shoves the C clip off but the towel way is free and fun.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to replace a stripped window crank on a 1997 Chevy Lumina?

The window crank is held in place by a locking clip. Remove the clip and pull the crank off the shaft. If the crank is stripped, just replace it. If the shaft is stripped, you have to replace the entire window regulator. See this post on how to remove a window crank.

http://ricksfreeautorepairadvice.com/remove-a-door-panel/
0helpful
1answer

2004 impala back window stuck down

You checked fuses and relays for electrical cranked window?
Remove: internal door handle, remove window crank if manual crank, door panel, remove film/paper seal.
If is mechanical crank: check for worn out parts on gearing and racks (reinstall crank and wind window up and down). Replace worn parts.

If electrical window crank: check for power at solenoid. Try switch again and watch to see if solenoid engages and tries to crank.
Check to see if switch is broken. Try door switch and drivers door switch.
Pickup another solenoid and replace old one.
0helpful
1answer

2002 passenger window c240 off track

How do you remove a 2004 Chevrolet cavaliers window crank? you can buy a window crank removal tool at an autoparts store that pulls the little pin off to remove it. ... How do you remove crank arm on a 2002 Chevrolet Cavalier?-----------------------------------------------------------------------------------------
Original Launch CResetter
2helpful
1answer

I whant to remove the windo handle

To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

0helpful
1answer

Remove the interor of the door

To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

0helpful
1answer

How to remove window crank?

first you need to remove all screws in thje door panel then remove the crank handle with a pick or special tool to remove the clip that holds the crank arm on. then remove the panel and you will find a plastic cover that cover needs to be removed to access the window regulator. once there you will see screws which hold the window those need to be removed so that you can remove the window crank.
0helpful
1answer

Remove & replace window cranks---- Jeep patriot 2009

you need to use a window crank removing tool and remove handle. Make sure window is all the way up before reinstalling handle on splines.
2helpful
1answer

Remove window crank

Remove wire circlip at the backside of the handle. Can usually be pulled loose w/a pair of needlenosed pliers by pushing in slightly on door panel and pull the rounded end of clip w/the pliers (hemostat pliers work great if you have some).
1helpful
2answers

Remove door panel on 2000 Neon. Window crank removal?

If no screws in center, then there will be a clip in behind that is hard to see & remove, unless you stop at autoparts store & buy one.
Not finding what you are looking for?

168 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...