Pull the door panel off and inspect the door latch, it is most likely defective.
SOURCE: 1992 Mazda MX-5 Door handle problem.
you will have to take the panel off to see why the inner lock/activator isnt working properly, besides youll have to take it off to fix it anyway.Maybe as simple as a bent handle to lock rod being bent and no longer long enough to activate lock correctly.youll just have to look and see.Let me know what you find
SOURCE: Jeep TJ Wrangler Outer door handle removal
The handle is held in place by two vertical wedges on both sides of the handle. To remove just force the wedges up with a hammer and screwdriver (be careful of the glass). Putting them back in is very difficult. I would suggest making the bends or adjustments with it installed so you'll know exactly how much you need. I hope this helps.
SOURCE: Need detailed diagram of 1998 latch mechanism to remove connections from it
there is no diagram... the latch is also a non-servicable latch, so if your problems in the latch- it needs a latch. i would look more closely at the outside door handle itself as i have seen a few of them break on the E series vans.you may be able to get detailed instructions thru autozone.com or @ autozone. hope this helps and good luck
SOURCE: The driver-side rear door simply
Either that child locking feature is at fault or a rod that connects to the handle in the door fell off That are the two choices there is that can be wrong with it
If the drivers door on your 2004 Mazda 6 does not open from the inside or the outside then chances are the lock/latch assembly is jammed or you might need to replace it. In order to get the door open the inside door trim will most likely need to be at least partially removed to access the inner workings of the door. This is no easy task as the panel is designed to be removed with the door open. If care and patience are used this can generally be done without major damage to the inside door trim panel.
500 views
Usually answered in minutes!
×