Power seat, driver side

These devices use motors with worm gears to provide the smooth operation and torque necessary to move the seat. The most common problem, other than the motors themselves failing (and since your does move somewhat, the motor is probably OK), the next biggest issue is something gets caught in the gear drive. Get a good look under the seat and see if there isn't something jamming the forward-backward motion of the seat.

Same thing happened to me checked everything found the problem was in seat switch box came apart, I just put back together and bam seat’s working again, check it.

Before you do any of the expensive things disconnect and reconnect the wiring to the seat I had the same exact problem with my 2009 Chevy Impala and was ready to take it to the dealer when I disconnected the power cables to it and reconnected them I found that one of the Harnesses was loose and the problem was solved

First try as fallow, get in to the seat, then keep tight your foot on floor and give a good press backward to the seat and operate the seat switch towards back, just release and do it again keep going that way it will start to move back words, if it start to move do it few time and do it every time you get in to the car at least two time per day continue it for one week, It will be OK otherwise need chassis no for more information,

I had the same problem some one on one of the web-sites solved his problem by banging on the track rail in the front while pushing the seat button back after a good few bangs it unjamed and works great now .I feel like I saved at least $1500 by dealer rates.

It isn't wired wrong. Mine does the exact same thing, but it didn't used to be backwards and the wiring has never been changed.

Check the fuse box for a blown fuse, both seats may operate on one fuse depending on the model of vehicle and the fuse may be located either under the dash on the drivers side or in the engine compartment on the drivers side.

You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.

is look like a fuse blowen you need to replace it look in the munual book

Good day;
What year is you car? Does the other controls work for the seat? and just to clarify the seat won't go forward of back?


Cheers