SOURCE: brake light switch
like other people are saying the switch is fine and the brake light still stay on, wat can i do to fix it???
SOURCE: brake light, 2008 Nissan Sentra
Open the trunk and locate the trim door that covers the back of the drivers side tail light assembly. Open the door and locate the bulb holder. The bulb holder can be removed from the tail light assembly housing by turning counter clockwise 1/4 turn. Holding the bulb holder in one hand, press gently on the bulb and turn then bulb counter clockwise to remove. Replace with a combo bulb and reverse proceedure to re-install.
SOURCE: 1984 Nissan pickup - brake lights stuck on - not
some nissans have a rubber plug on the metal part of the brake pedal look under the dash where the the pedal arm meets the brake light switch if there is a hole ther the plug has fallen out to make sure find the brake switch and manually push the plunger on the switch in have an assitant see if the brake lights go off if they do you will need to replace the rubber insert there will be a hole in the brake pedal arm where it goes
SOURCE: Where is the brake light switch on a 1997 nissan pathfinder?
The brake switch is mounted high on the brake pedal. A 14mm nut holds it in place. Don't mistake it for the cruise switch if so equipped.
SOURCE: My 1994 Nissan pickup brakes shudder at low speed
Inspect the brake rotors for grooving and score marks and also look to see if there are any heat cracks, if there is grooving or very little brake pad material remaining replace the brake pads and also two new rotors, it is also possible that it is just a frozen or stuck brake caliper, this would be indicated by an uneven rotor one that has more metal or meat on one side that the other also uneven brake pads indicates an uneven brake caliper application
453 views
Usually answered in minutes!
×