Tip & How-To about Ford Ranger
To bleed the clutch slave cylinder (inside the transmission) everything connected: the easy way: you have to adapt bigger deposit of fluid on top of the master cylinder clutch.(i did it by water bottle) about half quarter of fluid, then go down at the slave cylinder and put a clear hose on the bleed, and open the nut just little bit and see the air with fluid coming out,when no air coming,close the nut, remove the adapt deposit, push 3 times the clutch pedal, and you got it, clutch is up again
(time 15 minutes)
1,268 views
Usually answered in minutes!
×