20 Most Recent 2003 Toyota RAV4 Questions & Answers


Get you a can of SEA FOAM at a local parts store
be sure to read the directions before you buy it.

2003 Toyota RAV4 | Answered on Sep 23, 2019


You will get all the solution in service and repair manual which will provide you step by step help to locate and fix the problem easily and you will get the manual from the given link https://toolsnyou.com

2003 Toyota RAV4 | Answered on Aug 28, 2019


My noah 2003 keeps showing the exaust sign and Eco on the dash board screan, what could be the problem?

2003 Toyota RAV4 | Answered on Jul 23, 2019


Only if it was sitting for a LONG LONG time..... the belt...no biggie..change it!! Now .. the pump..ask why it needs replacing.. MAKE THEM SHOW YOU WHAT IS WRONG!! ... and do not take "just does" for an answer!!! If they insist it needs replacing, DEMAND to get the old pump returned to you and make them show you what is wrong with it..If they won't... its lawyer or arbitration time!!! YES>> the mechanic COULD have easily damaged it!!

2003 Toyota RAV4 | Answered on Jun 25, 2019


try to see if your getting power to it. check the wirering, then the fuses.

2003 Toyota RAV4 | Answered on Feb 15, 2018


Sounds like transmission fluid and filter needs changing. It's one of the most overlooked maintenance items. Trans fluid and filter should be done every 50k miles. If you tow a trailer should be done 30k. (I assuming this is an automatic transmission. You didn't say)

2003 Toyota RAV4 | Answered on Jan 09, 2018


Most likely your idle speed is too low due to dirt on throttle plates and IAC valve. cleaning these items usually restores normal idle operation.

2003 Toyota RAV4 | Answered on Jan 04, 2018


big end bearings( lower engine rod bearings to confuse) knock at idle and get louder with rpm
if the noise changes with rpm and you are hearing it near the ac compressor then it could be the ac pulley bearing
test if it is the compressor by listening and then turning the ac off the pulley will still spin but the compressor stops
if the noise remains , replace the pulley bearings

2003 Toyota RAV4 | Answered on Nov 16, 2017


find the solution in attached
f5330ab1-44cc-4a1c-b628-ace5d1a8c576.jpg

2003 Toyota RAV4 | Answered on Nov 03, 2017


could be a vacum leak, water in your gas,injector clogged check all your basics cause of no check engine light

2003 Toyota RAV4 | Answered on Oct 07, 2017


Error Code: P0325
Description:
Knock Sensor (KS) 1 Bank 1 - Circuit Malfunction
Possible Cause:
Irregular rpm.
Drivability problems.
Loss of power.
Engine damage.

Wiring.
Poor connection, short to earth, short to positive, open circuit.

Knock sensor improperly torqued.
Knock sensor.
Engine control module (ECM).

Possible Solutions:
Torque Knock Sensor 1 to specifications.
Check the resistance of the knock sensor (compare it to factory specs).
Check for broken/frayed wires leading to the sensor.
Replace the knock sensor.
Check Knock Sensor 1 and Knock Control.

Caution:
This feature search for unusual (spontaneous) combustion. The sensor detects unusual vibrations and based on that it generates a voltage. Is this voltage outside a certain limit a DTC will be set.

2003 Toyota RAV4 | Answered on Jun 03, 2017

Not finding what you are looking for?
2003 Toyota RAV4 Logo

512 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Toyota RAV4
2002 Toyota RAV4

501 Questions

1997 Toyota RAV4
1997 Toyota RAV4

447 Questions

1996 Toyota RAV4
1996 Toyota RAV4

332 Questions

2004 Toyota RAV4
2004 Toyota RAV4

348 Questions

1998 Toyota RAV4
1998 Toyota RAV4

310 Questions

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RAV4 Toyota

  • RAV4 Toyota

Most Popular Question

2003 rav4 stereo works but when push

  • Cars & Trucks
Loading...