20 Most Recent 1998 Toyota Tacoma Questions & Answers


you need the tool to take them out first. then you have leads that clip on to each one pull one off then unscrew the first spark plug then replace with new one then put the lead on that you took off. DO THIS ONE AT A TIME THOUGH AS THEY HAVE TO BE IN A SEQUANCE. and make sure they are spark plugs u want and not heater plugs that are on deisel veichals. if this helps please leave feed back thanks

1998 Toyota... | Answered on Sep 30, 2018


I suggest
you get one of those manuals people get nowadays to do it yourself.. My brother use it to repair my car and it's repaired like professionals. he got it from. www.reliable-store.com

1998 Toyota... | Answered on Mar 07, 2018


an ac specialist can check it in car with out the need to remove it
could be a loose connection as not much else goes wrong with the evaporator
If it has to come out be prepared to have to remove the dash

1998 Toyota... | Answered on Feb 10, 2018


The humming sound could be the fuel pump. It starts on the ignition to prime the pressure in the fuel system. It might be worth getting it checked as that could be starving the system of fuel.

1998 Toyota... | Answered on Jan 07, 2018


You said like tune up fuel filter was done, wires.

1998 Toyota... | Answered on Jul 05, 2017


A nut with six slots is called a castle nut, as it resembles a castle in appearance. Unscrew the castle nut with a deep socket. The wheel bearing is behind that.

1998 Toyota... | Answered on Jun 26, 2017


Check the throttle positon sensor on the throttle body. You can do that with a meter. Your idle air control turns off when the truck heats up and is the reason you are noticing it more after it is warmed up.

1998 Toyota... | Answered on May 27, 2017


Try reseting the retailing arms on N/S/R &O/S/rear both are on adjusting arms.. 10m and 13m open ended spanner turn opposite.
Sure enough you'll find it works

1998 Toyota... | Answered on Apr 14, 2017


Replace master cylinder

1998 Toyota... | Answered on Mar 11, 2017


did you connect the wires for the reverse servo/solenoid

1998 Toyota... | Answered on Oct 30, 2016


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

1998 Toyota... | Answered on Sep 09, 2016

Not finding what you are looking for?
1998 Toyota Tacoma Logo

486 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tacoma Toyota

  • Tacoma Toyota

Most Popular Question

98 toyota tacoma 2 7 t when off from

  • Cars & Trucks
Loading...