20 Most Recent
Questions & Answers
1999 Lincoln towncar drivers side window won't
The box you're referring to is the "driver's side door control module" if it operates when you press on it you might just have a loose solder connection on the pins. Obviously, you've already removed the inner door panel, so...
1. Unhook neg batt cable
2. Loosen the top screw
3. Press the bottom retaining clips on both sides in and pull back, or just pull back, the screw holds it in and the slots keep the thing steady.
4. Refrain from smashing everything and burning the car to the ground
5. Lightly unclip the three clasps holding the control module board in its housing
6. Visually check for damage, discolouration, loose or broken connectors.
7. Repeat step 4 if you don't find anything
8. Multimeter check or
9. Online parts search
10. Forget step 4.?
on Jul 11, 2019
I need to cahnge the
The seat track you need will have to either need power or be aligned so you can reach its' mounting bolts too. You will be able to see how the gear drive is attached on the replacement seat track. You may be able to unbolt the gear drive from the track on your damaged part. Then the seat should slide either way without the drive gears stopping you from moving the seat. Sometimes there is only room for a air ratchet to fit as the bolt can spin without having to move the ratchet handle.
on Oct 12, 2017
7\99 Lincoln Town car LF window down won't go up
there are only 3 things that really can go wrong motor regulator or switch list when you hit the up with if you hear motor then your regulator is broke you van buy motor and regulator in one piece if it is the original you will have to grind rivets off and use screws also with dome light on try switch lights should dim if switch is working
on Jul 01, 2017
I have a 1999 lincoln towncar thats having a issue
For the last 20 years of so, cars made for sale in the U.S. have an interesting emissions component.
That is, there are two sensors that screw into the engine block that detect the heat of the engine coolant.
In some cars these are even the same part, but have different tasks.
1) this sensor detects the engine temperature to operate the electric fan by the radiator.
If this sensor fails, it can cause the electric fan to not turn on when it is needed, and can cause damage to the engine from overheating.
2) This sensor is hooked to the computer and the temperature gauge to tell the computer when the engine is warmed up.
If this sensor fails, it can cause the symptoms you list.
What is happening is, with the sensor malfunctioning, it is like the old fashioned "hand choke" of 100 years ago, that you would adjust when the engine warmed up.
God bless your efforts.
on May 18, 2017
Not finding what you are looking for?