20 Most Recent
2000 Hyundai Accent - Page 9 Questions & Answers
Grinding when clutch is not engaged. Sound goes
the throw out bearing is what I am thinking Sue.may as well have a new clutch put in too as its the same amount of labor to do the whole thing as it is to just replace the throw out bearing.
Steam out from engine pipes/hose
Check you engine oil. If it is white or cream color there is water in the oil. If you are not leaking water onto the ground and the water level keeps dropping it's a good indication of a possible head gasket failure. Good luck.
2000 HYUNDAI ACCENT STOPS RUNNING
Hi had a similar problem last week with my 2000 accent took car to dealer who put it on the computer, turned out that the 'mass airflow unit' needed replacing. Very expensive part cost £182 and labour £36 (Hyundai dealer) sorry!!!!
Removing window crank
pry back the panel so you can see behind crank use a flat head
screwdriver and a towel so you don't scratch it. inside the crank is a
small U shaped clip get some small needle nose plyers and pull it out.,
Central locking on my Hyundai Accent no longer works
u will have to replace the celenoid so it can work normally again or just remove the celenoid and the car wont have a shift lock any more, you can also bypass the lock by pressing on the small hole on the top left side of the shifter.. hope this helps ..
Hyundai Accent 2000 overheating
If the water bubbles in the resevoir when the engine is running, the head gasket could be blown. There is often white smoke (steam) coming from the exhaust.
Not finding what you are looking for?