20 Most Recent 2006 Saturn ION Questions & Answers


in the fuse box there is a flasher relay change that out also if you have set off the stock alarm on the car it may not be shut off all the way I would try disconnecting the battery and resetting the computer and check all the fuses to make sure one isn't bunt out

2006 Saturn ION | Answered on Nov 10, 2019


sounds like a voltage surge from trying to jump start in the wrong place has fused a few components. you need a mechanic or auto electrician to take a look.

2006 Saturn ION | Answered on Sep 28, 2019


call the reimbursement department so they can start a recall... 1800-204-0261 we have the same promblem and they wont do a recall unless they get more complaints!!

2006 Saturn ION | Answered on Apr 04, 2019


have a shop replace the bearings in the clutch and reset the air gap

2006 Saturn ION | Answered on Jan 19, 2019


my first thought would be the squealing serpentine belt or could be brake pads. Combining squeal and stall from stopped position maybe you have a bearing going out on something the serpentine belt runs on. example if belt tensioner or A/C clutch bearing going bad could cause drag on serpentine belt. If a bearing is going bad you may be able to hear it under the hood.
https://www.youtube.com/watch?v=AEUe6uKxTv8

2006 Saturn ION | Answered on Jan 13, 2019


A/C ? Which fuse # how many amps ? Do you mean blower motor fuse ?

2006 Saturn ION | Answered on Apr 19, 2018


these online books for repairs etc they sell here on this website below. Must check it out

reliable-store.com
or manualslife com

2006 Saturn ION | Answered on Feb 02, 2018


they are not related ,you should address your axle

2006 Saturn ION | Answered on Jan 25, 2018


first thing to do is check for codes. this will give you a direction to begin diagnostics . most probable causes are, cranks sensor, ignition module or fuel pump. if you have a tach on the dash and you see rpm during cranking i would eliminate the possibility of a failed crank sensor, if no rpm signal go right to the crank sensor. next check for fuel pressure, 40psi is going to be within specs to allow it to run.

2006 Saturn ION | Answered on Nov 30, 2017


Doesn't sound like you would know how to do a fuel pump pressure an flow testing , suggest you take your vehicle to a qualified repair shop that has the proper diagnostic testing equipment .
Rather then guessing an replacing parts you don't need . (fuel injector's ) Could be low fuel pressure , a bad MAP or MAF sensor. What are the fuel trims showing ? short term an long term fuel trims . Are the O2 sensor's switching normally ?

048 Engine Hard to Start or No Start Scan Data for Starting Problems
004 Fuel System Tests Start Here

2006 Saturn ION | Answered on Oct 29, 2017


First try to spay a liberal amount of PB Blaster into the switch around the key to free up jammed tumblers in order to release the ignition switch and allow the key to be removed. ANY ATTEMPT TO JURY RIG THE WIRING WILL RESULT IN TRIGGERING THE ANTI-THEFT FUNCTION OF THE ECU AND DISABLE THE VEHICLE. Simply disconnect the ground cable from the battery to shut off all power to the vehicle.

2006 Saturn ION | Answered on Jun 04, 2017

Not finding what you are looking for?
2006 Saturn ION Logo

879 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Saturn ION
2004 Saturn ION

664 Questions

2003 Saturn ION
2003 Saturn ION

523 Questions

2005 Saturn ION
2005 Saturn ION

377 Questions

2007 Saturn Ion
2007 Saturn Ion

73 Questions

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ion Saturn

  • Ion Saturn

Most Popular Question

replace thermostat 2006 saturn ion 2 2l

  • Cars & Trucks
Loading...