20 Most Recent
1997 Mercury Villager - Page 2 Questions & Answers
I have been trying to
Nice story, but how can we help,you didn't share the codes
with us
You can look them up on the internet
Your telling the entire world, that for 2 years, that
where you live, there are no mechanics, just pretenders
that make a living not fixing a thing ?
97 mercury villager p1400 code.stumble when I exellarate..? Stumped. ....
Possible Causes
- EGR/EVAP solenoid connector is damaged (check pins for damage, moisture)
- EGR/EVAP solenoid control circuit open or shorted to ground
- EGR/EVAP solenoid has failed
- PCM has failed
Setting Conditions:
Engine running at Cruise speed under light engine load; and the PCM detected an unexpected voltage on the EGR/EVAP solenoid control circuit.
Sett
Thermostat location in engine
Hi there:Check
the spring end goes into the hose outlet housing as shown in the picture below...The jiggle valve goes to the top. It is to allow air to purge past the thermostat when refilling the coolant.Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using FixYa, have a nice day.
Where is fuel relay
Should be in the fuse box near the battery.
Check your owners manual for details.
Is cutting out and dying
Fuel injectors check those first then if they are good you have failing fuel pump...most likely..
Not finding what you are looking for?