20 Most Recent
1999 Mercury Cougar - Page 5 Questions & Answers
P0190 fuel rail pressure sensor A circuit
Could be a bad connection to the sensor clean and scrape to bright metal connectors. Or it needs to be replaced. It doesn't do this when dry?? Sounds like moisture problem with ignition system and wires. If so Spray liberly with WD-40. It will "dry out" wires. Inside and around distributor cap too.
I have a 99 Mercury Cougar 2.5 v6. I have only reverse. No forward gears. It's an automatic transmission
check the fluid condition/ex. full level/rose pink/red color is good if it's brown it's burning this could be from slipping/ improper cooling from hot running engine(the tranny lines go through the radiator)broken vacuum line/pressure loss dirty electrical connectors/blown switches inside the tranny/or the tranny is completely shot==this all depends on what you find if your engine has been running rough for a while your loosing vacuum inches and proper voltage and this will contribute to ruining a transmission in a short time also high heat /hot running engine == old transmission===I'm fried out === junk yard transmission=$$and a lot of work / rebuilt transmission===$$$$$ and other repairs as needed to not burn the new one out in 6 months or less good luck
1999 cougar gas gage not working
Either the dash gauge is faulty, a fuel pump/sending unit is faulty, or you have an electrical wiring issue...check in this order
Not finding what you are looking for?