20 Most Recent 2006 Nissan Altima Questions & Answers

0helpful
1answer
0helpful
2answers

Trouble codes P2128, P0643, P2138, P2122

ck with Nissan dealer, he can tell you.
3/11/2023 3:03:17 AM • 2006 Nissan... • Answered on Mar 11, 2023
0helpful
1answer

2006 Nissan Altima NATS read code 13b14 needs a 4 digit code.

Question edited for clarity and order. Question moved to model category. Try 5523 Or pay $9.99. Or the dealership https://www.google.com/search?q=nissan+altima+nats+codes ..
1/27/2023 1:11:38 AM • 2006 Nissan... • Answered on Jan 27, 2023
0helpful
1answer

Steering wheel radio control not working

You most likely have a defective Combination switch (Also known as "Spiral Cable" or "Clockspring") The audio system uses pins 14, 18, and 17 of the combination switch to make conmection to the audio system. Pin 17 is the reference voltage in. A failure here, will cause ALL audio controls to malfunction at the same time.The cruise control uses Pins 19 & 20 of the combination switch....Totally different circuit. Just because this circuit is working, does not mean that the problem is not in the combination switch.
11/10/2022 8:54:48 AM • 2006 Nissan... • Answered on Nov 10, 2022
0helpful
1answer

2006 Nissan Altima. What could cause it to run hot when AC is on and cause AC to blow hot air?

Question edited for clarity, add maker and typo 'Alima'. Question moved from AC Cars, maker of the AC Cobra. Let's deal with the overheating engine first. You may have air in the system https://www.fixya.com/cars/r29872074-vehicle_cooling_system_no_heat Or is may be the coolant temperature sensor not turning the radiator fan on, fan relay, or the fans themselves. There are a number of things that could be the issue. Here is the fuse box diagram. You have two fuses and a relay covering the Air Conditioning. https://fuse-box.info/nissan/nissan-altima-l31-2002-2006-fuses-and-relays The system may need refrigerant gas, but check the fuses and relay first as it sounds electrical because the green signal light isn't on.. Much of the issues you have are ultimately controlled by the Body Control Module and you may have a computer communication issue. The only way to diagnose that is by an auto electrician with a pro grade scan tool computer to check modules, sensors and the computer networks. This is not a $125 scanner, they cost between $3.5k to $5k.
9/4/2022 4:53:52 AM • 2006 Nissan... • Answered on Sep 04, 2022
0helpful
1answer

Does a 2006 Nissan Altima V6 have a coolant bleeding valve?

Question edited for clarity. Question moved to sub category. https://www.google.com/search?q=2006+Nissan+Altima+V6+bleeding+coolant+valve ..
4/9/2022 2:48:34 AM • 2006 Nissan... • Answered on Apr 09, 2022
0helpful
2answers

Nissan Altima Dome light will not turn on

sorry i have to say this, but have you checked the bulb? the cover pulls off pretty easily.next, check the fuse. the dome light fuse will run with another electrical component. be sure to check them all!and if you can manually turn on the light. check the door switch located in the door jamb close to the latch.
3/14/2022 2:37:06 PM • 2006 Nissan... • Answered on Mar 14, 2022
0helpful
1answer

My 2006 Nissan Altima while driving misfires and check engine light time zone what could be the problem

You need to connect it to a Code Reader / Scan Tool. It will give you a code and the code will tell you what the problem is. The more expensive computer scanners will diagnose every module in the vehicle. Garages will read the code for free in the hope of getting the work. It takes 2 minutes.
3/7/2022 11:02:29 PM • 2006 Nissan... • Answered on Mar 07, 2022
0helpful
1answer

How do I get my Nissan Altima 2006. 2 go n2 park & get my key 2 come out of the ignition

Crank the steering wheel hard to right. When you get to where you cant turn anymore, CRANK IT HARDER?? That works. By the way is your steering wheel locked up?
1/10/2022 9:41:09 PM • 2006 Nissan... • Answered on Jan 10, 2022
0helpful
2answers

Trying to locate crankshaft position sensor on

THE CRANKSHAFT SENSOR IS LOCATED ON THE OIL PAN.
1/10/2022 9:39:33 PM • 2006 Nissan... • Answered on Jan 10, 2022
0helpful
1answer

My 2006 Nissan Altima will crank but not start?

Was the battery disconnected? (anti-theft system in play)Fuel pump issues?Out of fuel (gauge issues)?Any Diagnostic Trouble Codes (DTC)?
10/9/2021 11:56:16 AM • 2006 Nissan... • Answered on Oct 09, 2021
0helpful
1answer

I HAVE A 2007 NISSAN ALTIMA 2.5 SL.....THE AIR CONDITIONER (HOT OR COLD) DOESN'T WORK WHEN CAR FIRST TURN ON. SOMETIMES IT TAKES 15-20 MIN BEFORE IT STARTS OPERATING (IF AT ALL). IF I TURN THE CAR OFF

it could be a faulty blower motor. You said AIR on hot or cold.... what about just vent on high with the AC off? does that work normally?
8/26/2021 7:27:52 PM • 2006 Nissan... • Answered on Aug 26, 2021
0helpful
1answer

My power locks power windows and power drivers seat all quit working at the same time on my 2006 nissan altima. Checks all the fuses? Any help please we have rain moving in. If it could be a relay, wh

I have seen this common problem on several Altimas. You have a wire that has been pinched in your power seat that is frayed and grounding out on the seat frame causing the circuit breaker in the BCM to trip. U will need to remove the drivers seat from the car, Use a screwdriver to pop off the seat adjustment knobs, the pop off the plastic cover from the seat switch. There are two phillips head screws holding the switch to the seat. It is necessary to cut the seat material a small amount to access the screws and remove the switch. U will need to unplug the switch from the bottom side of the seat and unclip the wiring harness from the seat frame in order to remove the switch/wiring harness assembly. Once removed you will see the chafed wire. Simply cut the insulator that covers all the wires back far enough to repair the wire. I normally take a small piece of vacuum hose, split it down the middle and put over the chafed wire. Tape everything up with some electrical tape. When putting everything back together, re-route the wiring harness to a different location so it doesn't get pinched again. Re-install the seat and enjoy having all of your power options working again. If you need any more info on this or some helpful pics, let me know. Have a good day! ASE Certified Auto Tech Scott Day
8/16/2021 1:48:07 PM • 2006 Nissan... • Answered on Aug 16, 2021
0helpful
1answer

Windows not working properly including the sunroof could it be the fuse? if so where is the fuse box and what is the fuse number? 2006 nissan altima

All the fuses and relays are listed here. Looks like they may be controlled by the Body Control Module?

Fuse Box Diagram Nissan Altima (L31; 2002-2006)

https://fuse-box.info > nissan > nissan-altima-l31-2002-...
Instrument Panel. The fuse box is located behind the cover below and to the left of the steering wheel. There might be some help here. You can change the word 'windows' for 'moon roof'. https://www.google.com/search?q=2006+nissan+altima+power+windows+not+working ..
6/4/2021 4:10:04 PM • 2006 Nissan... • Answered on Jun 04, 2021
0helpful
2answers

Nissan Altima Stereo Wiring Diagram

I have a 2009 Nissan Altima 2.5S and some body had cut the main harness to the radio now i dont know what color is which please help
3/5/2021 4:49:45 AM • 2006 Nissan... • Answered on Mar 05, 2021
0helpful
1answer

WHAT IS THE2009 GRAND LIVINA RADIO RESET CODE

Code is normaly found in the service manual of the car on a card in the book itbis 6 or 7 codes in honda 4 or5 in your car it is the preset buttons on front of radio you might have to contact dealership an prove you arevthe owner of car to get codes usually when you changevthe cars battery it trips the sni theft feature of the radio makeing it useless If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_c7b5aba9012a13b2
10/29/2020 8:39:22 AM • 2006 Nissan... • Answered on Oct 29, 2020
0helpful
2answers

Reset Nissan Altima seatbelt light which is flashing

A scan tool is needed to reset the seatbelt light, unhooking the wires turned the light on as a fault, a scan tool will reset code. also make sure all connectors are connected good, the computer may reset itself after it sees a few key cycles and tests the system and it passes but it may take awhile. i have seen some that will stay on until they are reset, if the light is still on after all this time then a scan tool will be needed to turn off the light. good day.
7/10/2019 2:47:33 PM • 2006 Nissan... • Answered on Jul 10, 2019
0helpful
1answer

I can't locate fuel filter on 2006 Nissan Altima

It's in the fuel tank under the rear seat:

http://www.fixya.com/cars/t3504888-change_fuel_filter_nissan_altima_2006
4/23/2019 10:05:37 PM • 2006 Nissan... • Answered on Apr 23, 2019
Not finding what you are looking for?

951 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,587 Questions

2003 Nissan Altima
2003 Nissan Altima

1,450 Questions

2002 Nissan Altima
2002 Nissan Altima

1,306 Questions

2001 Nissan Altima
2001 Nissan Altima

569 Questions

1995 Nissan Altima
1995 Nissan Altima

534 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Altima Nissan

  • Altima Nissan

Most Popular Question

while replacing blower motor resistor

  • Cars & Trucks
Loading...