2006 Ford Focus - Page 5 - Answered Questions & Fixed issues
Why does my car keep stopping ?
Whatever is causing it, the engine computer has sensed it from one of it's sensors. That's why the light is on. If you have the computer scanned for trouble codes-autozone and others do it for free-the code should point you in the direction of the problem. You can post it here for help, or you can google just about every code and get results.
8/24/2014 7:29:24 PM •
2006 Ford Focus
•
Answered
on Aug 24, 2014
•
46 views
I need written instructions on how to replace a outside driver side door handle for an 06 ford focus
Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.
7/20/2014 4:36:54 PM •
2006 Ford Focus
•
Answered
on Jul 20, 2014
•
733 views
Ford part department
No Like most thermostats they are a very simple device with a spring that is normally closed and as water temp goes up it opens.
7/8/2014 12:32:54 PM •
2006 Ford Focus
•
Answered
on Jul 08, 2014
•
54 views
There is a special tool to compress the piston back into the caliper on odyssey honda 2005 what is it
Why worry about buying a special tool when the job can be done with a G clamp. After removing the caliper from the rotor remove the outer brake pad and leave the inner pad where it is against the piston. Now with the G clamp place the end of the clamp on the back of the caliper and the adjustable part onto the brake pad slowly wind the clamp dawn against the brake pad which will in turn push the caliper piston all the way back into the caliper. Then remove the brake pad and replace with new ones. Replace the caliper onto the rotor and tighten. Then pump the brake pedal with the engine OFF.
6/30/2014 11:43:12 AM •
2006 Ford Focus
•
Answered
on Jun 30, 2014
•
174 views
Ls focus
sorry don't know cant help you
6/23/2014 8:09:20 AM •
2006 Ford Focus
•
Answered
on Jun 23, 2014
•
155 views
What can i do ?
I believe it is a problem with the transmission. Has been serviced? it may have some damage, unsure of the cause.
5/30/2014 9:14:47 PM •
2006 Ford Focus
•
Answered
on May 30, 2014
•
536 views
How can I adjust my ford focus wiper travel range
This should have been checked before the mechanic gave you the car back.the lack of travel indicates they put the linkage in the wrong place where it engages to the motor.take it back and have them correct this.You can do nothing unless you are handy and want to take apart yourself and play with it. good luck
5/7/2014 2:47:49 PM •
2006 Ford Focus
•
Answered
on May 07, 2014
•
334 views
Not finding what you are looking for?