2006 Ford Focus - Answered Questions & Fixed issues
Brake light stays on
Pull up on the brake pedal, see if stop lamp goes out? You may need to check stop lamp switch and brake pedal arm? Pull that fuse in diagram, see if it kills the stop lamps? At the bottom left, in diagram, see the green wire with yellow tracer, that wire should not be hot unless you step on the brake. You can use a test light to check for voltage. good luck
6/2/2021 7:58:51 PM •
2006 Ford Focus
•
Answered
on Jun 02, 2021
•
176 views
Wheel nuts on back wheel of 06 ford focus stripped.
Hi Ray,
I put in some time at an auto salvage yard. Aluminum wheels were big sellers and not something we wanted to damage.
When the lug nuts needed some persuading, we got out the high impact 12 pt deep sockets.
First try we used the correct size.
If they were stripped, one size smaller. We hammer them on to the lug and use a breaker bar with a pipe extension.
The only real problems we had were getting the lug nuts out of the sockets.
Good luck and best regards,
Mike
11/11/2020 4:34:55 AM •
2006 Ford Focus
•
Answered
on Nov 11, 2020
•
724 views
IAT Senor
Better leave it alone and take to shop to do. You may incurr more cost if you damage ECU.
1/14/2018 4:04:59 AM •
2006 Ford Focus
•
Answered
on Jan 14, 2018
•
91 views
Wing mirror fixes ford focus 06 plate
If you closely examine the door where it bolt up to the metal is probably bent a little so when you tighten up the mount its just not tight, bent the metal a little and should tighten things up for you. If nothing else take the other side off and look at how this are shaped on the other side.
12/19/2017 9:04:58 PM •
2006 Ford Focus
•
Answered
on Dec 19, 2017
•
160 views
2006 ford focus won't accelerate
Check your catalytic converter under car...When it starts to clog up...Your car want accelerate correctly...Puts back pressure on your motorr
12/14/2017 10:35:47 PM •
2006 Ford Focus
•
Answered
on Dec 14, 2017
•
440 views
Instrument cluster
You have probably left off or not plugged in a connector properly. They are only supposed to plug in 1 way but sometimes can be forced in back to front. Check all the connections and multi plugs.
6/9/2019 12:49:08 PM •
2006 Ford Focus
•
Answered
on Jun 09, 2019
•
248 views
Ford Focus 55 Plate, Engine Light Comes On and Goes
Not uncommon for Ford focus coil packs to play up I've replaced a few I would recommend, replace coil pack and have leads. If you have car serviced at the regular service interval the plugs should be ok.
3/5/2017 12:20:22 PM •
2006 Ford Focus
•
Answered
on Mar 05, 2017
•
217 views
2006 FORD FOCUS FRONT HUB REMOVE AND REPLACE
It is just bolted on, the new hub comes with a new bearing already mounted into it. You will also need a new hub nut (MUST BE REPLACED) and a torque wrench that goes to at least 200 foot pounds.
2/15/2017 9:02:42 PM •
2006 Ford Focus
•
Answered
on Feb 15, 2017
•
208 views
Not finding what you are looking for?