20 Most Recent 2003 Nissan Xterra Questions & Answers

Question edited for clarity. Question moved to model category. There are three fuses and a relay that cover the blower. Radio probably has an inline fuse, but they are also monitored by the Body control Module.

Nissan Xterra (WD22; 1999-2004) fuses and relays

https://fuse-box.info > nissan > nissan-xterra-wd22-199... Fuse box diagram - Here you will find fuse box diagrams of Nissan Xterra 1999, 2000, 2001, 2002, 2003 and 2004, get information about the location of the ...

Take it to a different shop. Something is wrong with it. However, when the airbag light is on, that means the airbag will not deploy in an accident. You should have that fixed first. The dealership is the best option for making the keyless entry work. If this was at all helpful, please rate. Thanks for asking.

Hi. The fuse is in the block of fuses. It is #18, and 10 amps. It's easy to change. There should be 4 extra fuses on the side of the panel

Yes it is an engine that can and in most cases bends valves if the timing belt brakes

po328 is a knock sensor code ,0174 &0420 are emissions codes. Possibly a faulty knock sensor throwing out the timing, It may just have a vacuum leak causing it to run lean, affecting the timing causing knock sensor code, Scan for live readings, ck knock sensor, o2 sensors, A/F ratio & converter,clogged injector ect. Good luck y

Passenger side by he rear of the motor. It has a Black cap with silver sticker and a 10 millometer bolt holding it down.

At this website www.reliable-store.com I found all complete guide,much better language, complete detail in 800+ pages, ..and they also have live chat for instant help feature

When the abs light is off and u press brake pedal the abs is activated for some reason. When light is on the abs is deactivated. Take vehicle to a different garage. U can also do this when light is on take vehicle to AutoZone or have someone with a abs scanner scan for codes. This will give u a idea what's wrong. Your mechanic don't know what they are doing and just guessing.

hi, found this on another board, hope it helps..jm That is correct. If the 100A AlternatorFuse is blown, the starter will not crank, since no current can get to the neutral safety switch and the activating coil of the starter relay.

there will be an oil pressure sender unit attached to an oil galley in the block sound like it is that or ma bad connection for the wire

test for freon

No just the coolant surge tank.