20 Most Recent
1996 Buick Roadmaster Questions & Answers
Can I program the car to recognixe the key fob.
1996 Roadmaster
- Locate the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. ( Connector has black/white wires leading up to it and it is not connected to anything.)
- Jump programming connector terminals. Leave terminals jumped unitl step 6.
- System should now lock and unlock doors to indicate programming mode has been entered.
- Press any button on keyless remote once. System should now lock and unlock doors, indicating successful programming of keyless remote.
- Repeat step 4 for additional remote or other existing keyless remote.
NOTE: A maximum of only two Keyless Remotes can be programmed.
- Remove programming connector jumper wire to exit programming mode.
- Test remote(s).
96 Buick Roadmaster running lean.
That is an oxygen sensor, these sensors send a signal to the computor to adjust the rich/lean fuel mixture.
When a code comes up for them, they generally need replacing.
Not finding what you are looking for?