2006 Ford Ranger - Answered Questions & Fixed issues
Misfire ford ranger 2006
Most misfires are ignition related so it is worth checking spark plugs and spark power and quality. A bad misfire is likely to switch on a warning light and in that case a scanner could provide more information. A constant misfire on a single or a related pair of cylinders could be caused by injection or compression problems or perhaps even an air leak.
I once had an engine that misfired because one cam lobe had disappeared, completely worn away.
In most cases there is no shortcut and only a systematic approach to diagnosis will lead to success.
Disable autolocks
There is no easy way to fix disable them. the problem is most likely caused by a defective driver door switch panel.
Oil in water ford ranger 2.5 td
Watch your temperature gauges you might ave accidentally used an oil jug o put water in the radiator or You either have a blown head gasket or hate to say a cracked head or block! You can do a cylinder compression test to determine which cylinder but if you get a newspaper in the classifieds there are ads for blown head gasket repair kits they cost a couple hundred but are claiming to have a lifetime guarantee now as opposed to replacing the headsets and sending the head to be inspected you are looking at atleast a $300 bill or higher just for parts if you have a mechanic do it you can get ready to shell out about $600 easy labor and parts not including tax? Good luck! If you need further help, reach me via phone at
https://www.6ya.com/expert/james_8f14c50d9c6cdea8
Fuel pump wont wort
It is usually under the dash on the passenger side or behind the kick panel on the same side.
Not finding what you are looking for?