20 Most Recent
2005 Dodge Ram 1500 - Page 8 Questions & Answers
Heater not working
After the engine has warmed to normal operating temperature, feel both heater hoses. If both are hot, the coolant is circulating through the heater core. Then the problem is probably the temperature blend door in the heater case. It is probably vacuum controlled. You will have to check for a vacuum signal to the blend door actuator-probably a little metal canister with a lever connected to the blend door.
When I turn the heater on, the air is not warm.
First, check the two hoses going through firewall that feed heater core. If one is hot and the other is cold or luke warm this means heater core is blocked and will require to be backflushed to open. If both are hot then this means an inside panel door for the heat is not opening under the dash. Hope this helps
Can I change my fuel pump by removing the bed
Yes you can change a fuel pump by removing the bed, but if you don't have much fuel in the tank it is way easier to just drop the tank all it really is is the heat shield and the tank straps super easy
Noisy lifters
its either worn lifters,rocker arms or camshaft lobes.Try to adjust the valves or add a bottle of STP oil treatment to your oil and that should help reduce the noise.
01 dodge ram 1500 5.2L. Radiator was empty, filled
it may only leak when driving..when the pressure increases. this leak could be internal as well as in a head gasket. fill it up and let it idle and get up to temp and check for leaks then.(never remove the rad cap from a hot engine)
Not finding what you are looking for?