20 Most Recent
2000 Chevrolet Silverado 1500 - Page 4 Questions & Answers
How to remove gauge cluster
there should be 4 to six screws around the cluster setup connecting the clear plastic cover to a black or dark color plastic piece connected to the cover unscrew those screws and disconnect the wiring clips from the back of the cluster
2-3 shift solenoid circuit
P0758 Chevrolet
P0758 Chevrolet - 2-3 Shift Solenoid Circuit Electrical
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2-3 Shift Solenoid Valve
- 2-3 Shift Solenoid Valve harness or connectors
- 2-3 Shift Solenoid Valve circuit is open or shorted
What does this mean? When is the code detected?
When the Powertrain Control Module (PCM) detects a continuous open, short to ground or short to power in the 2-3 Shift Solenoid (SS) valve circuit, then DTC P0758 sets.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0758 Chevrolet Description
The 2-3 Shift Solenoid (SS) valve controls the fluid flow acting on the 2-3 shift valves. The 2-3 SS valve is a normally-open exhaust valve that is used with the 1-2 SS valve in order to allow four different shifting combinations. The solenoid attaches to the control valve body within the transmission. The Powertrain Control Module (
PCM) controls the solenoid by providing the ground path.
Read more:
http://engine-codes.com/p0758_chevrolet.html#ixzz3kcwzXFmK
Packing wheel bearings
you cant pack your wheel bearings they are a sealed hub if hub is bad will need to replace the whole unit
What would cause truck to run rough in wet weather
My advice is to look at ignition loom under the bonnet sounds like water is getting in remove all electrical connectors spray with a water repelant spray also carfully check wiring for breaks in protcective cover make sure the ignition is not tracking to earth look for a blue spark jumping from plug lead/ignition.
Not finding what you are looking for?