20 Most Recent 2004 Dodge Intrepid - Page 6 Questions & Answers

it\'s your TPS! well Greg first clean intake with toothbrush and carb cleaner! when it gets dirty the throttle position sensor doesn\'t know where it it so it will act like that, so it\'s a good idea to clean it first.

could be crankshaft sensor.

P0300 - Random/Multiple Cylinder Misfire Detected

telling you to add oil to engine. maybe you should have oil & filter changed all together. asap. maintenance is very important, I cannot stress this enough, air & fuel filters need to be changed aswell.

It is going into limp mode. Have the transmission computer scanned for codes. It likely has a input shaft speed sensor.

Try a new thermostat.

How does it act when you get it running. Does it quit as soon as it starts? Will it run at all?

A lot of possible answers there.I need a good bit of info. Have you checked for fuel to the motor or spark when it stops?I can help if you answer those Questions in detail.

Usually a problem with the brake switch or the solenoid that locks the shifter in park.You may be able to unlock the key switch without turning the switch on, then take the shifter out of park.

Thermostat is bad or the housing NY have a leak.... I just fixed mine last month

Someone will need to troubleshoot the coils to see if you are getting power and a ground pulse from the computer. Could be a sensor or several other things.You may need to get a shop manual to have the procedures to test the components.

if it is getting oil in the air filter box could be a busted comprestion ring allowing comprestion to build up in the block instead of pushing it out the pipe