Top 10 2004 Ford Mustang Questions & Answers

2004 Ford Mustang Logo

Question

  • 5,892 People Helped

reset service engine soon light 2004 ford mustang

Autozone no longer resets the service engine soon light. How can I do this myself?

Posted by on

Answer

  • Most Helpful of 2 Answers

The cheap and easy way is to disconnect your battery and turn on your headlights and leave it for a few minutes to reset the ECU. Otherwise you will need a scan tool to do it.

Posted on Mar 17, 2009

Question

  • 1,997 People Helped

where is the fuse for cig. lighter for 2004 mustang

where is the fuse for the cigarette lighter on a 2004 mustang

Posted by on

Answer

  • Most Helpful of 1 Answers

Fuse no.1(20amp) in the under dash fuse panel is for lighter.
Fuse no.9(20 amp) in the under hood fuse panel is for the power point.

Posted on Jun 02, 2009

Question

  • 1,730 People Helped

Gas tank flap stuck open how do you get it to

Gas tank flap stuck open how do you get it to close

Posted by on

Answer

  • Most Helpful of 1 Answers

Spray wd-40 on the release catch just on the inside of the filler neck. Left side when standing at the gas tank lid.

Posted on Jun 18, 2009

Question

  • 1,944 People Helped

Driver side window on 2004 mustang stopped working

The driver side power window on my 2004 mustang just stopped working. It hasn't gotten wet. There is only one fuse for both windows and the passenger side works fine. Is there something else that could have caused this to happen?

Posted by on

Answer

  • Most Helpful of 1 Answers

the window switches in the door can offten go bad just from sticky fingers. some times the are known to just stop working all of a sudden. it is also posible that the motor has gone bad, or more likely a bad conection at the motor or switch. the door switches on the mustangs are not the most sturdy switches. the tend to break loose and move around. u can test the motor by simply runing 12volts the the terminals on it. depending on witch terminal has power and witch has ground determins if the windo goes up or down. also check with volt meter or test light that there is power to the switch, just turn the key on and ground the test light and plug in the terminal that goes to that switch.

Posted on Apr 24, 2010

Question

  • 4,936 People Helped

need a 2004 fuse box diagram for mustang

need a 2004 fuse box diagram for mustang

Posted by on

Answer

  • Most Helpful of 1 Answers

go to this free Ford website to view or download the users guide for this vehicle.
the fuse block diagram is located under the roadside emergency section.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Posted on Oct 20, 2010

Question

  • 2,233 People Helped

fuse box mustang 2004 diagram

fuse box mustang 2004 diagram

Posted by on

Answer

  • Most Helpful of 1 Answers

Go to this free Ford website to view or download the owners manual for your vehicle.
The fuse block diagram and fuse sizing is located in the emergency roadside assistance section.

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Posted on May 05, 2011

Question

  • 4,611 People Helped

i need a diagram for routing 2004 mustang gt

i need a diagram for routing 2004 mustang gt serpentine belt

Posted by on

Answer

  • Most Helpful of 1 Answers

See diagram below I found online for you.


gozer.gif

Posted on Sep 01, 2011

Question

  • 6,524 People Helped

Which is the radio fuse for 2004 mustang V-6

Which is the radio fuse for 2004 mustang V-6

Posted by on

Answer

  • Most Helpful of 1 Answers

The main radio fuse is in the fuse panel inside the vehicle in the fuse panel to the left of the steering wheel down by the brake pedal. Below is a fuse layout diagram of that panel. I marked the fuse you are wanting to check. This should be in your owners manual if you have one. If you do not have an owners manual and would like a copy of it, feel free to email me directly at [email protected] with your make, model and year and I will be happy to email you a copy of it. Hope this helps....

9_30_2012_11_07_37_am.jpg

Posted on Sep 30, 2012

Question

  • 2,231 People Helped

how do I reset the anti theft system on my 2004 ford mustang 3.9 ?

how do I reset the anti theft system on my 2004 ford mustang 3.9 ?

Posted by on

Answer

  • Most Helpful of 1 Answers

PATS System?

Check for B codes with a professional scan tool

Posted on Nov 23, 2012

Question

  • 1,923 People Helped

Brake Caliper will not release

Right Front Brake Caliper will not release. Have replaced both front Calipers, Brake Hose's, Pads and Rotors. Have changed out the ABS Module and have bleed all wheels. What should I look at next?

Posted by on

Answer

  • Most Helpful of 2 Answers

your line is clogged somewhere. disconnect it from the caliper and the abs block and blow through it; a small piece of debris could cause big problems. also if your master cyl has two outputs for front brakes then it could be causing the problem. does it not release only when it's running or even with the engine off? sometimes the booster changes the piston position slightly in the mc and blocks the fluid from returning to the reservoir

Posted on Mar 05, 2013

438 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Mustang
1998 Ford Mustang

706 Questions

2000 Ford Mustang
2000 Ford Mustang

694 Questions

2001 Ford Mustang
2001 Ford Mustang

653 Questions

1995 Ford Mustang
1995 Ford Mustang

589 Questions

2002 Ford Mustang
2002 Ford Mustang

617 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

2004 Ford Mustang Mustang

  • 2004 Ford Mustang Mustang

Most Popular Question

fuse cig lighter 2004 mustang

  • Cars & Trucks
Loading...