20 Most Recent
2000 Ford Expedition - Page 6 Questions & Answers
Can I replace the engine from a 4.0 with a 4.6 using the same tranny?
well as far as going from a 4.0 v-6 to a 4.6 v-8 goes im sorry to say nothing would line up Not even the fuel lines as the engine you propose to use has two more cylinders so nothing would line up , plus the mcu wont be able to run It (the car is made for a v-6) nope plugs,fuel lines,trans bolts, exhaust pipe nothing will line up would require tons of hand fab and after market parts to even get it close
but the added power of the v-8 would be cool !!!
1/5/2016 1:41:01 AM •
2000 Ford...
•
Answered
on Jan 05, 2016
Does the 2000 Ford explorer have a timing Chain or
It's a timing chain... They will probably last for as long as the vehicle does (175k-200k miles depending on upkeep and willingness to keep the dog alive). That said, if there's a reason to have the timing chain cover off an engine over 100k... I'm the type that would go ahead and replace the timing chain while it's in front of you if you plan on having the vehicle for more than a year or so.
If you have the engine pulled for any reason over 100k, then that's another time that I'd be replacing the timing chain and the oil pump while I'm at it...
12/13/2015 7:42:29 PM •
2000 Ford...
•
Answered
on Dec 13, 2015
No overdrive
check the fluid level and condition if needed change the fluid and filter. If not check the valve body and the wiring to it make sure your switch is good and not shutting it off
11/16/2015 12:21:33 AM •
2000 Ford...
•
Answered
on Nov 16, 2015
Interior lights won't shut off
An on/off switch that controls your lights is stuck in the closed position. Slamming hatch unhinges it and returns it to open position where lites turn off. U have a few of those switches - at least one for each door.
11/7/2015 8:18:57 PM •
2000 Ford...
•
Answered
on Nov 07, 2015
Adjust idle
Before i would adjust idle i would first check the timing. It should idle at or around 750 rpm. Secondly depending on how many miles you have put on the spark plugs i would also consider changing them. Changing spark plugs i a time consuming job. The ladt two plugs neareast the firewall are really hard to get out and when you put the plugs back in use a plug lubricant for the threads.
10/28/2015 6:01:07 PM •
2000 Ford...
•
Answered
on Oct 28, 2015
Not finding what you are looking for?