20 Most Recent
Questions & Answers
1993 NIssan D21 manual 4x4 shakes alot on take off and anytime there is heavy torque loads. After 1st gear, very little if any shaking.
I think you have checked the major points, but if the transmision hung loose long enough it could damage the U-joints and motor mounts. The easy way to check the u-joint is to put the truck on ramps and put it in gear, then get under the truck and attempt to turn the drive line. If the drive line move 1/4 turn or more the u-joints are damaged. The motor mounts can be checked when the motor is running. Standing over the motor while someone else revs the motor you can see the motor move from side to side, more than three inch movement could indicate loose or broken mount. The clutch may be the culprit but I would check these first.
on Jul 16, 2019
1993 nissan pick up won't start
Possibly a bad connection on the positive side coming from the battery or a weak ground. Check where the leads join the terminal clamps. Has the battery been verified as good? It doesn't take a lot of amps to run lights but it does to turn over the engine. Jump starting it does not require a fully charged battery.
on May 01, 2017
Emission test readings
if the test was just recently done have the customer go back to the place that did the test and ask for another printout. that`s the only way to get the readings.
on Jan 22, 2015
Not finding what you are looking for?