20 Most Recent
1992 Dodge Dakota - Page 2 Questions & Answers
92 dodge dakota 5.2 4x4 won't stay running, hard
What fault codes do you have? to check for fault codes using the check engine light blink method do the following, turn the key to run and then off, then to run and then off, then to run and watch the check engine light, count the blinks, there will be a pause and then more blinks, that is the code(s) So lets say it blinks 2 times and then 5 times, that is code 25. Google the code or codes under the heading: "Dodge OBD1 fault codes"
Need trouble codes 12,33,55
All three codes seem unrelated.... the turbo charger trouble code is especially strange as I can't imagine you have one on the Dakota.
P0012 "A" Camshaft Position - Timing Over-Retarded (Bank 1)
P0033 Turbo Charger Bypass Valve Control Circuit
P0055 HO2S Heater Resistance (Bank 1, Sensor 3)
Fuse box panel for 1992 dodge dakota
Not all fuses are installed, only those that run the systems that were installed by the factory, you will have empty fuse slots.. I know this because I had this same truck for 20 years.
1992 dodge dakota no spark
Did you do a fault code test to see if anything shows up that might explain the no spark? The ignition control module is part of the ECM in this truck you might have a defective circuit.
10/10/2016 10:23:41 PM •
1992 Dodge...
•
Answered
on Oct 10, 2016
92 dodge dakota how to set up screwdriver start
Hell before put a push botton on it all u have to do is find your starter relay and rrun two 12 awg Wires from each side of the terminals to the botton i did that on my 92 new yorker after it got wrecked and the airbag safty switch wouldn't let the car crank. It will work only if you can still use the key
Not finding what you are looking for?