20 Most Recent
2000 Mitsubishi Diamante Questions & Answers
2000 mitsubishi Diamante,one week after a new axle
By the sound of your problem your vehicle has an electronic automatic gear box but correct me if I am wrong..Now this can be caused due to a faulty electronic part but I cannot guarantee this.It may need a diagnostic tool hook up to the car to read the error code.(if it's giving a check engine light )
Mitsubishi diamante electronic door switch problem
the following checks need to be made.
All listed components are all share a fuse , and all share the same ground, G200.
Check the fuse/circuit breaker for power on both sides, if OK, follow the harness to connector C214 a 12 pin connector to the right of the glove box opening to see if there is a problem there.
Ground 200 is located on the toe plate at the front edge of the passenger's front door. Check for bad connection there.
If everything is good up to this point you will check The Black/White wire that runs through the main harness under the dash, and splits into several Black/White wires at splice S245, in the main wire harness under the driver side of the dash.
Info from:
http://www.xcardiag.com/
Not finding what you are looking for?