20 Most Recent
2003 Pontiac Aztek Questions & Answers
I need to get a
If you can provide an email address and I'll send it to you.
Removing alternater from 2003 aztec with a 3400 engine
1. Disconnect battery.
2.Remove the bolts from the two dogbone motor mounts located at top of motor front of car.
3.Disconnect the upper radiator supports (this provides a little extra tilting room).
4. Use a ratcheting strap to jack/tilt the engine forward. Attach one end to an anchor point toward the rear of the engine and the other to the frame above the radiator.
5. Ratchet/tilt the motor as far as possible.
6. Remove serpentine belt.
7.Tie a rope or tether of some sort to the alternator.
8. Remove bolts from alternator (if i remember correctly there are 3).
9. Using the rope lower the alternator down behind the motor so you can remove it from under the car.
You will the reverse procedure for installing a new one. Other people will suggest removing the windshield wiper transmission or resevoir. But i prefer to remove as few parts as possible. This same "tilting" method you will use to change your spark plugs/wires. So use high quality plugs /wires at least for the 3 rear ones or you will be repeating this headache soon. Trust me.
Not finding what you are looking for?