20 Most Recent 1996 Mitsubishi Galant Questions & Answers

0helpful
1answer

Engine will not start (4g93)

Is there spark at the plugs and fuel at the engine?
3/16/2019 7:05:04 PM • 1996 Mitsubishi... • Answered on Mar 16, 2019
0helpful
1answer

I have a 96 Mitsubishi Galant 4 cylinder 2.4 the

i dont know what that code means but should not be hard to find out. Never change anything on your car guessingg that it is the problem. there might be a faulty sensor or a broken wire and you went out and spent alot of money and headache to put a new transm !!!!!since your problem is defenitly not the transmission, i would say there is poor comunication between the gear box and ecu
12/3/2017 10:24:50 PM • 1996 Mitsubishi... • Answered on Dec 03, 2017
0helpful
1answer

I don't know how to read the spark plugs. They

Do you have symptoms of an issue? Some oil is normal for a car this old. Post a pic of them if you want us to read them for you. Otherwise, replace the plugs, making sure the gap is set to 0.044 in.
10/25/2017 1:23:42 AM • 1996 Mitsubishi... • Answered on Oct 25, 2017
0helpful
1answer

OVER REVVING RANDOMLY IN MITSI VIENTO OR GALANTE 1996

Check into the automatic idle system.It may just need a good cleaning.
8/29/2017 6:15:50 PM • 1996 Mitsubishi... • Answered on Aug 29, 2017
0helpful
1answer

I have replaced my spark plugs. When my car is in

idle control valve check this and clean it, its on the air intake, valve opens and close when engine needs more air when it sticks it dont get the right air fuel mix. and stalls engine.
7/22/2017 6:03:31 PM • 1996 Mitsubishi... • Answered on Jul 22, 2017
0helpful
1answer

1996 Mitsubishi Galant: electrical

Fuse able link by the battery .start there
4/2/2017 12:09:38 PM • 1996 Mitsubishi... • Answered on Apr 02, 2017
0helpful
1answer

Hi i hve 96 mitshi galant blowing black smoke for couple of years how do i stop it.

Black smoke of often a sign of worn rings. That is a major engine overhaul.
5/28/2015 7:05:00 PM • 1996 Mitsubishi... • Answered on May 28, 2015
0helpful
1answer

I added Repco additive Petrol Boost and Clean, to my 1996 mitsi galant. Now it wont go. Have batte power. Do I drain the fuel tank or do I buy more fuel to dilute it?

Hopefully you added this product to a FULL tank of gas. That is usually what the directions call for. However, if you didn't, you can top off the tank which will dilute it but probably not fix the problem. I would suspect the fuel filter got clogged or maybe the fuel injectors. I hope you don't have to drain the gas tank, it is messy. If you have to change the fuel filter, here are some suggestions from DMV.org: "
  • Turn off the car before you work on the fuel system AND remove the fuel pump fuse or relay.
  • Smoking's extra life-threatening while working with fuel, so don't do it.
  • If you are working in an enclosed garage, make sure there is adequate ventilation.
  • Gasoline is a serious skin irritant; wear petroleum-resistant gloves, like like nitrile, while handing fuel or fuel lines.
  • Automotive fuel is also a known carcinogen, so avoid breathing fumes or prolonged exposure.
  • Clean up any spills immediately and dispose of any gasoline or fuel-soaked rags and the old fuel filter properly. Be sure to handle the old fuel filter carefully, as it will still contain a small amount of fuel."
  • 4/5/2015 4:54:36 AM • 1996 Mitsubishi... • Answered on Apr 05, 2015
    0helpful
    1answer

    My car mistbushi gallant 1996 model manual automatic gear box just select twice, why is it so?

    Check you TPS it have to do alot with your trans it send the signal to the trans to tell the trans at what RPM to shift
    /uploads/images/car-mistbushi-gallant-1996-model-manual-34990172-3-1.jpg
    2/14/2015 1:40:30 PM • 1996 Mitsubishi... • Answered on Feb 14, 2015
    0helpful
    1answer

    Distributor stuck won;t go all the way in

    the drive gear or shaft is not aligned properly . you may have to turn the shaft slightly to get alignment. check that the "o" ring under the distributor is not holding up the process.
    2/14/2015 4:46:28 AM • 1996 Mitsubishi... • Answered on Feb 14, 2015
    0helpful
    1answer

    Hi i can't put my distributor all the in its stuck half way in

    What model and year is your card, you had to mark the distributor before taking out
    2/14/2015 4:40:44 AM • 1996 Mitsubishi... • Answered on Feb 14, 2015
    0helpful
    2answers

    I NEED THE SIZE OF THE SOCKET TO REMOVE THE HEAD BOLTS

    Hi Joseph, I'm glad to help! Joseph, I just told you how to check for valve seals. Listen carefully if your engine doesn't have a lot of miles then the "Valve Seals" can be replaced with the head still on the car which will cut down on cost of the repair. If it does have tons of miles then a "Valve Job" would be the correct way to "GET-UR-DONE". Hope this helps and have an awesome day again Joseph.
    2/12/2015 4:44:30 PM • 1996 Mitsubishi... • Answered on Feb 12, 2015
    0helpful
    1answer

    How to fix a Mitsubishi gallant with an engine code p1400

    check the following:
    10/22/2014 3:25:35 PM • 1996 Mitsubishi... • Answered on Oct 22, 2014
    0helpful
    1answer

    Code 36

    google.com key in 1996 Mitsubishi gallant code36
    8/2/2014 12:30:44 PM • 1996 Mitsubishi... • Answered on Aug 02, 2014
    0helpful
    1answer

    WHY DOES MY 1996 GALANT BLOW OUT A HUGE CLOUD OF SMOKE WHEN I START IT THEN GOES AWAY IM USING A TON OF OIL

    Hi Joseph, I'm glad to help! When engine get a lot of miles on them the seals get hard and bridle and allows oil you slip by and it goes out the exhaust in at cloud of smoke. Here's a way to see if it is you "Valve Seals". When your driving it usually clears up and you have no smoke. Here's what you need to do after driving the car and it has cleared up, pull into a parking lot and let it sit and idle for 3 minutes. If a cloud of smoke comes out of the tailpipe when you take off, then you have bad "Valve Seals" and they will need to be replaced. Hope this helps and have an awesome day Joseph.
    7/20/2014 1:18:45 PM • 1996 Mitsubishi... • Answered on Jul 20, 2014
    0helpful
    1answer

    What is the size of a mitsubishi galant 1996 atomatic transmission?

    Go to Wikipedia & look up Mitsu Vehicles & the years made That should have your transmission model or unit as it is called Most likely can find it with a search engine,ask the question
    7/16/2014 8:25:43 PM • 1996 Mitsubishi... • Answered on Jul 16, 2014
    Not finding what you are looking for?
    1996 Mitsubishi Galant Logo

    301 questions posted

    Ask a Question

    Usually answered in minutes!

    Popular Products

    Top Mitsubishi Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    View Most Popular

    Galant Mitsubishi

    • Galant Mitsubishi

    Most Popular Question

    meant wheel bearing going out

    • Cars & Trucks
    Loading...