20 Most Recent 2002 Nissan Maxima Questions & Answers

Question edited for clarity. Question moved to model category. Videos in the link https://www.google.com/search?q=2002+Nissan+Maxima.+How+to+remove+the+center+console ..

https://carmanuals2.com/nissan/maxima-2002-electrical-system-el-48102

So where is the instrument light dimmer switch on a 2008 Nissan Altima ?

its not the motor its the switch to the seat...it happ. to me b4.

there might be another fuse box in the glove box, or the ground might be bad.

When the accelerator is depressed in any car, there is always a mechanism there to enrichen the mixture to maintain the fuel to air ratio. On your car. it will be a MAP(Manifold Air Pressure) sensor in conjunction with the TPS (throtle position sensor). One of these could be the problem. Be sure the air filter is clean as well. If you need further help, reach me via phone at https://www.6ya.com/expert/gary_9c859f4aa7e5ab10

You likely have leafs stuck inside the chamber. Remove fan and clean it out

-Sounds like missed fired -Check it out. Good luck Mai

the factory service and repair manual will help you with diagram to fix the facing problem or any other problem you face furthur so go to the given link and get the manual easily http://toolsnyou.com/

One of the keys is not programmed, or is a bad key causing the no start. Watch the red security led when the key is first turn to on, the led should turn off, indicating a good key

There is a cable that goes from the motor mounted on the right side rail that runs to a small gear box on the left rail, more then likely the cable has popped out of either the motor or the gear, it’s flexible and can be popped out fairly easily, even having bottles under your seat can cause this problem..

This sounds like the mode selector is stuck on heat. Under the dash is the location of the hvac plenum and you need to check the cables and levers that are on it to see if they move when heat and cold are changed as well as the lever for where the air is directed.

guessing will not fix the problem take it in and have the fault codes read and then fix what is broke