20 Most Recent
2004 BMW 3 Series Questions & Answers
I HAVE A BMW 325CI
You can sometimes get lucky and do a brake fluid flush / replace and the codes can be cleared. Otherwise you will need to replace the two pressure sensors on the master brake cylinder... if you pull the error codes it can tell exactly which one has failed. ( i would do both since you are already in there)...REMEMBER buy BMW OEM parts... this is a difficult repair... so put the right parts in to avoid doing it again in 6 months
My car was slow to
You’ll have to check amp draw on the starter, it may be bad ornaolenoid has quit. All auto parts stores have a little hand held machine to check this but I’m not sure if they’ll let you borrow it to take it home, if the car can’t make it rob the store.
2004 325xi BMW wont start - replace spark plugs and fuel pump
If u hear the engine cranking in the AM, the batt & alt sound good. If you don't get any engine cranking in the am you may have an electrical short draining the battery. Before u convict the starter u must make sure the battery has full power in the AM. (12V) & 12 V to the starter
Not finding what you are looking for?