20 Most Recent 2007 Chrysler Pacifica Touring Questions & Answers

0helpful
1answer

Why does'nt the Cruise Control Activate 2007 Chrysler Pacifica

Hi Daniel, I'm glad to help! One of the most found problems with cruise control's inoperative here at the dealership is a vacuum problem. If you do not have vacuum from the engine to the cruise control under the hood, then even though the rest of the system is working fine it will not pull the accelerator pedal. NEXT: Another problem could be that the cruise control unit under the hood is not getting power from the brake switch. Check and see if there is power at the unit's connector under the hood. If there is no power then replace the brake switch. NEXT: The PCM may not be getting a signal to apply the cruise and this mainly happens because of a cruise switch problem OR the signal is not getting through the "Clock Spring". This could be either one causing this problem, so replace the switch first because its cheaper. If all of these things check out good then it could be the Cruise Control Unit itself. Hope this helps and have an awesome day Daniel.
3/8/2022 12:03:36 AM • 2007 Chrysler... • Answered on Mar 08, 2022
0helpful
1answer

Fuel Rail Leak

Did did you change the o-ring at the fuel line to fuel rail connector? Do that before you change the fuel rail. According to an e-bay seller who is selling a used fuel rail from his salvage shop, the following fuel rails are interchangeable. 300 05-10 Fuel Injector; 2.7L and 3.5L AVENGER 08-10 Fuel Injector; 2.7L AVENGER 08-10 Fuel Injector; 3.5L CARAVAN 08-10 Fuel Injector; 4.0L CHALLENGER 09-10 Fuel Injector; 3.5L CHARGER 06-10 Fuel Injector; 2.7L and 3.5L JOURNEY 09-10 Fuel Injector; 2.7L JOURNEY 09-10 Fuel Injector; 3.5L MAGNUM 05-08 Fuel Injector; 2.7L and 3.5L NITRO 07-11 Fuel Injector; 4.0L PACIFICA 05-06 Fuel Injector; 3.5L PACIFICA 07-08 Fuel Injector; 4.0L SEBRING 04 Fuel Injector; Conv, 2.7L, from 07/30/03 SEBRING 04 Fuel Injector; Sdn, 2.7L, from 07/30/03 SEBRING 05 Fuel Injector; Conv, 2.7L SEBRING 05 Fuel Injector; Sdn, 2.7L SEBRING 06 Fuel Injector; (Conv, Sdn), 2.7L SEBRING 07 Fuel Injector; (Sdn), 2.7L SEBRING 07 Fuel Injector; (Sdn), 3.5L SEBRING 08-10 Fuel Injector; (Conv, Sdn), 2.7L SEBRING 08-10 Fuel Injector; (Conv, Sdn), 3.5L STRATUS 04 Fuel Injector; Sdn, 2.7L, from 07/30/03 STRATUS 05 Fuel Injector; Sdn, 2.7L STRATUS 06 Fuel Injector; (Sdn), 2.7L TOWN & COUNTRY 08-10 Fuel Injector; 4.0L
12/28/2018 11:51:31 AM • 2007 Chrysler... • Answered on Dec 28, 2018
0helpful
1answer

How do I change the spark plugs on a 2007 Chrysler Pacifica?

the upper plenum will need to be removed on the 4.0 liter. Once the plenum is out of the way the coils can be removed and the plugs replaced. on the 3.8 liter remove the plug wires from the plugs one at a time and replace that spark plug. Place the wire back on the plug as soon as it is installed and move on to the next. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
10/9/2016 12:08:05 AM • 2007 Chrysler... • Answered on Oct 09, 2016
0helpful
1answer

Cost to replace fuel injector no. 3 cylinder. 4 liter 6 cylinder

I really, really doubt that all three injectors failed, but if they did you are looking at least $400.00 USD to replace them.
10/7/2016 9:17:54 PM • 2007 Chrysler... • Answered on Oct 07, 2016
0helpful
1answer

Jumped starter terminals 30/87, starter works but no crank when key turned on.

Click no start is typically a bad battery, bad starter, bad solenoid or loose dirty battery connections. But seems you have covered those items. Have you checked you negative battery cable where it attaches to the frame and motor? Use multi meter and check from positive of battery to the motor(block) for 12 volts. Also do this while turning key to start position. If voltage drops out when doing this double check battery voltage and all connections. If it does not drop then check the solenoid wire coming from ignition. When key in start position you should have a good twelve volts. If you you do then test the main leads hooked to solenoid for power. If solenoid wire from ignition has less than 12 volts double check connections at battery and also test the clutch pedal switch.
9/28/2016 5:18:27 PM • 2007 Chrysler... • Answered on Sep 28, 2016
0helpful
1answer

What is a firing order for chrysler Pacifica 4.0 touring 2007

Here you are.... 26276888-npd0gbdexwdj0hvnxtlbogec-4-0.jpg
9/8/2016 8:44:56 PM • 2007 Chrysler... • Answered on Sep 08, 2016
0helpful
1answer

I have a leak but it is not an oil leak coming from around where my oil filter is

Hi Anonymous, Spray degreaser around the leak then hose it off, run the motor to see where the leak is coming from and tighten or replace the part............CHEERS..
5/5/2016 1:53:23 AM • 2007 Chrysler... • Answered on May 05, 2016
0helpful
2answers

Why does my 07 Chrysler Pacifica feel like its going to vibrate off the road with acceleration at 40 - 60 Mph?

2007 Chrysler Pacifica Problems, Defects & Complaints

www.carcomplaints.com/Chrysler/Pacifica/2007/ 5 days ago - The 2007 Chrysler Pacifica has 97 problems & defects reported by Pacifica owners. The worst complaints are engine, transmission, and ...‎Engine - ‎TSBs 13 - ‎Crash Tests 2 - ‎Defect Investigations 2
9/29/2015 2:34:15 PM • 2007 Chrysler... • Answered on Sep 29, 2015
0helpful
1answer

How many ounces of r134 does my system take it has rear air

it takes 1.8 lbs
7/28/2015 9:38:33 PM • 2007 Chrysler... • Answered on Jul 28, 2015
0helpful
1answer

Where is the pcv valve located on my 07 pacifica

Look for a large hose from the throttle body/intake manifold to the valve cover - near the back. It should be a friction fit into a gromet.
1/22/2015 4:45:31 AM • 2007 Chrysler... • Answered on Jan 22, 2015
0helpful
1answer

200 pacifica malfunction indicator light flashing

We have had those for 35 years So nothing new there Read your owners manual If it flashes- I would not be using it -as it could be a Class A cylinder misfire, that could ruin your exhaust converters Check your OBD Codes
10/8/2014 2:41:13 AM • 2007 Chrysler... • Answered on Oct 08, 2014
0helpful
1answer

Why does the Traction Control Indicator stays ON 2007 Chrysler Pacifica

Could be one of your wheel speed sensors is out. The ABS and traction control are linked on most vehicles so when the sensor is bad it will disable the traction control. The best thing to do would be to get it scanned and see what code the computer is throwing.
7/22/2014 4:28:19 AM • 2007 Chrysler... • Answered on Jul 22, 2014
0answers
0helpful
2answers

How do you check transmission fluid on 2007 pacifica?

You need to go to your dealer to have it checked. I know it sounds stupid but it requires a special dipstick tool, a scan tool, and a fluid temperature -level chart just to check the fluid level on that model.
6/8/2014 9:41:51 PM • 2007 Chrysler... • Answered on Jun 08, 2014
0helpful
1answer

Stalling

The timing is off. This needs to reset by a factory technician with a computer program that resets the values accoprdiongly.
4/15/2014 6:24:51 PM • 2007 Chrysler... • Answered on Apr 15, 2014
Not finding what you are looking for?
2007 Chrysler Pacifica Touring Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Chrysler Cars & Trucks

  • Chrysler Cars & Trucks

Most Popular Question

firing order chrysler pacifica 4 0

  • Cars & Trucks
Loading...