20 Most Recent
2002 Pontiac Grand Prix Questions & Answers
Car Won't Work. HELP!!!
did you check battery could be death.Gas pedal is moving,under steering wheel any wires damaged.It is full park position.
Key/wheel locked!
need to open up steering assembly , wheel lock is stuck won't budge pressing down on key assembly
I got a 09 pontiac g6 wont start.there is no crank no clicks when i turn the ignition on but the engine light is on
You have know idea how the starting system works , an with the engine light on your best bet would be to have it towed to a qualified repair shop .
When the ignition switch is turned to the Start position, the body control module (BCM) receives battery voltage on the ignition 1 voltage circuit, and less than 5 volts on the off/run/crank voltage circuit. The BCM supplies voltage to energize the RUN/CRANK Relay 32. The BCM sends a high speed GMLAN serial data message to the engine control module (ECM) that the key is in the start position. The ECM receives the message from the BCM, and also receives a serial data message from the transmission control module (TCM) containing the shift lever position. If the shift lever is in Park or Neutral when ignition switch is turned to Start, the ECM supplies voltage to the START Relay 31. The START relay supplies voltage to the S terminal of the starter solenoid, through the 30 A STRTR Fuse 26, in order to crank the engine.
Firing order 2007 pontiac g5 2.2
Standing in front of car looking at the engine, cylinder layout is from left to right > 1--2--3--4 .... So the number one cylinder will be the one that is closest to the 'passenger' side fender.
Firing order is 1 4 3 2
Diagram 2006 Pontiac montana
copy and paste https://www.repairprocedures.com/service-manual/document/2005/pontiac/montana-sv6-awd/engine/drive-belt-replacement/2829_866_18767_142376_12_1506919.html
Not finding what you are looking for?