20 Most Recent 2005 Scion xA Hatchback Questions & Answers

look in manual it will tell you

dont thinc he did it rite--there are 2 nozels on the system-------go to a parts store and ask for assistence before heat stroke

Ain't one,lol,their's a plug on side of transmission,remove,if fluid comes out,it's full,if not put finger in hole to feel,if you can't feel,get turkey baster with fluid and add till no more will go in.

Actually, your idea is very close to what the car dealership would do, but not tell you that's what they did. Just make sure you wipe the area(s) clean with rubbing alcohol and do not use any type of conditioner to the pieces that will have silicone placed around\under them as, this will prevent the silicone from making a proper seal and you could lose your rubber pieces going down the road. Once you have put your silicone in and have put your rubber pieces back into their grooves, give the silicone 24 hours to set. This way, the bond is tighter and this should also fix your leaking issue. Hope this helps.

go to a salvage yard and get different wheel liners.. rip the old ones out..put the new ones in..

go to auto zone .com they have tutorials as to how to take things a part, also will have price for it

It was on a different car (an old Vauxhall) but I had that problem. The resistor on the back of the dial had blown - so the only setting that still worked was the one that didn't need the resistor (i.e. the full power option). My car was probably a bit older than yours so I don't know whether things are still that simple!